|
»
Pick
a method
When fitting your new plates you want
to get a secure, long lasting result and
as such we recommend the use of either
double sided sticky sponge tape or the
good old conventional method of using
screws and caps.
»
Double
Sided Sponge Tape
Prior to fitting your plates make sure
the surface to which you are sticking
to is completely clean and dry. Apply
3-4 strips of sponge tape along each plate
and then press firmly against the vehicle
bodywork. Continue to apply pressure.
Check after 24 hours for adequate adhesion.
»
Srew
and Caps
If you choose to fit your number plate
using screw and caps you'll need to be
equipped with both a drill and screwdriver.
You'll need to drill the holes through
which the screws go through into your
vehicle. And then apply the caps on top
of the screws. If you want a really secure
fit then this is your method.
If purchasing your plates
at our workshop we provide a fitting service
please ask for further details
»
|
